LED RGB Controller
RGB Remote Controller
Part No.: BV-LED RGB Wireless Controller
BV-LED RGB wireless controller is signed for LED lighting dimmer. It can control modules, LED ribbons, LED bars, high-power LED modules and other LED lighting fixtures, which form the complete LED lighting dimmer system with 12V DC power supply
Make sure the products working voltage must be 12V DC or it will be damaged.
The wireless control should be powered by 23A, 12V battery.
Please connect according to the above sketch map. The connection port can be pulled out
When the power is on, the red indicator will light, the green indicator do not light. The controller is waiting for work. To press the on/off button, it will began to work. The green indicator will flash when pressed any button unless it is out of work
Up and down button: It can work only when the controller is in color changing mode
Our packing is one wireless control matched one controller. Please do not use other wireless control or it will not work
Static red, static green, static red/green mix, static blue, static red/blue mix, static green/blue mix, static red/green/blue mix, jumpy cycle changing, disorder flash changing, radial cycle changing, disorder gradual changing
Power: 12V DC
Working temperature: -25 to 60 degrees Celsius
Measurement: 104 x 65 x 24mm
Connection: Common anode
Rated load current: 10A
Maximum load current: 15A
Output: Three CMOS output
Control method: Four buttons, wireless control
Buttons (from top to bottom): Mode, up, down, on/off
The Peccinin remote control can be used ...
2. The shell of remote ...
If you have a remote control( with ...
This product is a new design ...
- Contact ...